How to start moving on a manual transmission and don`t decay

Many novice drivers have some troubles with clutch. Some drivers can`t start to drive smoothly and the car starts with jerking.

Three ways to start to drive on manual transmission and don`t decay:

Way 1

The first way is for novices: this is most light way to start the moving without gas pedal. It helps you to learn start the moving smoothly and without jerking. You would feel the moment of engagement of the engine with the gearbox.

To start the move:

  1. start the engine;
  2. put the feet on the coupling;
  3. turn on the first gear;
  4. Release the clutch pedal smoothly.

When the discs will be connected, you feel vibration and the car will start the moving.

Way №2. 

Second way is good for drivers which have learned Way №1.

  1. Put the gearbox to neutral and start the engine;
  2. press the coupling and turn on the first gear;
  3. put the feet on the gas pedal and control revolution counter (
    maintain 1500-2000 rpm. )
  4. Release the clutch pedal smoothly.

Way №3. Third way is swing.

  1. press the coupling and turn on the gear;
  2. put the feet on the gas pedal but not press;
  3. release the clutch pedal smoothly and up the engine rotation.

Author: delfi

Leave a Reply

Your email address will not be published. Required fields are marked *