Ford Engine Diagram M-6007-A50NA

Engine Assembly M-6007-A50NA Engine

Read and use all of the following instructions carefully prior, to installation. The engine is shipped dry without engine oil; before starting add engine oil. A pilot bearing is provided but not installed to allow for an automatic transmission.

Technical Specifications M-6007-A50NA Engine
Drive belt layout

Coolant Flow Diagram:

engine system coolant circulation ford

In the absence of a heater circuit, the heater supply should be linked to the heater return in order to facilitate the removal of air from the right cylinder head and ensure adequate flow of coolant through it. Insert a restrictor with a diameter of 5/16″ (0.3125) into this hose.

Engine System Oil Circulation Diagram

Ford Engine System Oil Circulation Diagram

Prior to installation, prepare the engine by taking out the oil pressure switch from the filter adapter. Fit the suitable connector and utilize a pre-lube tank to initiate the oiling system. Ensure that the oil reaches the valve train, and if needed, remove the valve cover. The presence of oil at the valve train indicates that the engine has been primed. Verify the oil level and top it up as required.

Author: delfi

Leave a Reply

Your email address will not be published. Required fields are marked *